Zastone D9000 Programming Software
To program your Zastone D9000 mobile radio, you can use the official manufacturer software or professional third-party alternatives. Official Zastone Software
The Symptom:
You plug in the cable, Windows makes a sound, but the software says "Failed to open port" or "Radio not connected." zastone d9000 programming software
Description. Hello is it possible to use CHIRP for the ZASTONE ZT D9000 ? is similary to ICOM 2820. because with zastone software, Home - CHIRP New Model #4691: Zastone ZT-D9000 - CHIRP Zastone ZT-D9000 * Closed. * Normal. * - Home - CHIRP Zastone D9000 Walkie Talkie Firmware Update Instructions To program your Zastone D9000 mobile radio, you
- Language Barrier: The software is English, but some menu translation is poor. "High/Low Power" is obvious (50W vs 10W). "RPTTE" stands for "Repeater Tail Tone Eliminate."
- APRS Programming: You cannot program APRS via software. The D9000 uses a pseudo-APRS via the mic port. You must set your callsign and beacon interval manually via the radio’s menu.
- Mac Users: Use Windows Virtual Machine (VMware Fusion or Parallels). The serial USB pass-through works perfectly. Wine/Crossover does not work due to direct COM port access.
- Turn the D9000 OFF.
- Connect the programming cable to the "DATA" port on the back of the radio’s main body (not the mic jack, not the faceplate jack).
- Connect the USB end to your PC.
- Turn the radio ON. The status LED will flicker. (Note: Some firmware versions require you to power on after connecting; others require it before. Try both.)