If the treadmill suddenly stops during a workout, the manual instructs you to check the (located on the front motor cover near the power cord). Press the red button to reset.
Ensure a minimum of 3.5 feet (approx. 1 meter) of clearance behind the treadmill for safety. xterra xt900 treadmill manual
If you have lost your manual, bookmark this guide. Better yet, print it out and keep it tucked behind your XT900’s motor cover. Your future self—mid-workout, sweating, and staring at a blinking “LUB” message—will thank you. The Essential Guide to the Xterra XT900 Treadmill
features of motorized incline. Use the Incline ▲/▼ buttons to adjust mid-workout. 1 meter) of clearance behind the treadmill for safety
The manual says to use "silicone lubricant," but doesn't specify which . Avoid spray-on bike chain lubes (they attract dust) or WD-40 (it's a solvent, not a lubricant). You need , specifically for treadmills. To apply it, the manual forgets to mention you must loosen the rear roller bolts to lift the belt, squirt the oil in a zigzag pattern, then re-tighten evenly.
Here are some common issues that you may encounter with your Xterra XT900 treadmill, along with some troubleshooting tips: