Manual — Xmtd-2201

XMTD-2201

Based on the model number, the is a standard, widely used digital temperature controller (thermostat) commonly found in industrial ovens, incubators, and machinery. These devices are typically manufactured by various Chinese electronics companies (such as Yudian or similar generic brands) and share a common set of features and instructions.

AL1

| Code | Meaning | Typical range | |------|---------|----------------| | | Alarm 1 value | 0–400°C | | AL2 | Alarm 2 value | 0–400°C | | P | Proportional band | 0–100 (3–5 typical) | | I | Integral time | 0–3600 seconds (200–240 typical) | | D | Derivative time | 0–900 seconds (30–50 typical) | | T | Control cycle time (seconds) | 1–100 (2–20 typical) | | SC | Sensor correction (offset) | –50 to +50 | | LCK | Lock (password) | 0=unlocked, 1=locked |

1. Display Screen: A high-resolution display screen that provides easy-to-read information and feedback.
2. Control Panel: A user-friendly control panel that allows you to navigate and access the device's various features and functions.
3. Input/Output Ports: A range of input/output ports, including USB, HDMI, and audio jacks.
4. Power Button: A power button that allows you to turn the device on and off.

1. Power ON: The PV display shows room temperature. The SV display shows the last set value.
2. Enter Set Point Mode: Press and hold the SET button for 1 second. The SV display will start blinking.
3. Adjust Value: Use the ▲ (Up) or ▼ (Down) buttons to change the blinking digit.
4. Save & Exit: Press SET again briefly. The new target temperature is saved.