Wake On Lan Anydesk Hot May 2026

"Wake-on-LAN + AnyDesk + Hot (likely meaning ‘hotkey’ or ‘hotspot’)"

Here’s a helpful review of the combination — based on common user scenarios.

  1. Hardware Support: The target computer’s motherboard and network card must support WoL. This usually needs to be enabled in the BIOS/UEFI and the OS network adapter settings.
  2. AnyDesk Installation: AnyDesk must be installed on both the client and target machines.
  3. A "Relay" Device: For remote Wake-on-LAN over the internet, you need a second device on the same local network as the target computer that is powered on and running AnyDesk.

Nearly all desktops and many laptops made after 2010 support WoL. Check your motherboard manual for "Wake on LAN," "PME Wake," or "Power On by PCI-E." wake on lan anydesk hot

  1. Enter BIOS/UEFI (usually Del/F2/Esc on boot).
  2. Locate power management / advanced / onboard peripherals settings.
  3. Enable any of: “Wake on LAN”, “Power on by PCI/PCIe”, “Wake on PME”, “Wake on Magic Packet”.
  4. If present, enable “ErP”/“EuP” only if it still allows WoL (ErP may disable network standby—if WoL stops working, disable ErP).
  5. For laptops: enable “Wake on LAN from S5/hibernate” if present to allow waking from full shutdown.
  6. Save and reboot.

How to Use Wake-on-LAN with AnyDesk: A Step-by-Step Guide Ever needed to access your office computer from home, only to realize you left it turned off? It is a frustrating hurdle for remote workers. Fortunately, AnyDesk supports Wake-on-LAN (WoL). This feature allows you to "wake up" a sleeping or powered-down computer over the internet. What is Wake-on-LAN? "Wake-on-LAN + AnyDesk + Hot (likely meaning ‘hotkey’

on the same network to relay the "Magic Packet". Direct "Wake-on-WAN" (waking via the internet without a local relay) is not natively supported in the same way by their current cloud infrastructure. Setup Guide: Making it Work Nearly all desktops and many laptops made after

3.1 Enable WoL in BIOS/UEFI

Scroll to Top