Thyssenkrupp Levant Stair Lift Installation Manual «INSTANT»
ThyssenKrupp Levant stair lift is a straight-run accessibility solution designed for quick installation directly onto staircase treads rather than the wall. While full professional installation typically takes about half a day, the manual outlines several critical technical requirements and safety protocols for a successful setup. aquadapt.co.uk Pre-Installation Requirements Staircase Specs
4. Troubleshooting Common Errors (Direct from the Manual)
- Obstruction sensor (under footrest) – should stop lift if contact occurs.
- Seat sensor – lift shouldn’t move unless seat is folded down (occupied position).
- No-Load Run – Operating the carriage without a rider.
- Load Test – With 250–300 lbs (manufacturer limit) for smooth operation.
- Error Code Table – LED blink codes on the charger or drive unit.
- Remote Control Pairing (if included) – Radio frequency pairing steps.
For further technical support or professional installation, consult a certified dealer via Lifeway Mobility or find replacement parts through Access2Parts . thyssenkrupp levant stair lift installation manual
During installation, ensure:
- Torque wrench (set to 35 Nm for rail brackets)
- 13mm, 17mm sockets
- 4mm and 5mm hex keys
- Digital level (accuracy ±0.5°)
- Drill with masonry bits (for concrete stairs)