Satlink WS-6933

To update the software (firmware) on your , you will need a computer, a USB cable, and the correct firmware file. Keeping the device updated is essential for detecting newer DVB-S2 signals and adding updated satellite frequencies. Software Update Steps

Missing Satellites:

Sometimes a "Software Update" only updates the system, not the satellite list. You may need to run a separate "Write Parameters" or "Upgrade Data" step using a .bin file that contains the updated TP (Transponder) list. Satlink WS-6906 Software Upgrade Guide | PDF - Scribd

Q: The upgrade tool says “Device not ready.”

A: Your WS 6933 did not enter boot mode. Try Method B (the internal button/pads).

Let’s walk through the actual workflow. If you want to understand how the update works technically, think of it as rewriting the device’s EEPROM chip. The WS 6933 has a bootloader mode that accepts new code only via USB, not SD card.

To perform the update, you need the official .bin firmware file and a Windows PC.

: Ensure the meter is fully charged or connected to its power adapter to prevent shutdown during the update, which could "brick" the device. Step-by-Step Update Process Driver Installation