Satlink Ws-6906 — Software Upgrade

To upgrade the software on your Satlink WS-6906 satellite finder, you will need a PC, an RS-232 serial cable, and the SatlinkTools (or Satlink Updater) utility Requirements

: Ensure you use firmware specifically designed for your hardware revision. Using an incorrect version (e.g., firmware meant for older hardware on a newer model) can result in a "brick" or cause the "Lock" light to stay permanently lit without functioning. to a PC for the update? Satlink ws 6906 software free download-AliExpress satlink ws-6906 software upgrade

Method A: Upgrading the Database & Channel List (Safety Method)

1. Open the Upgrade Tool on your PC (e.g., HostIO_6906.exe).
2. In the tool, click "Open" or "Browse" and select the Firmware file you downloaded.
3. Verify the COM Port. Go to your Windows Device Manager -> Ports (COM & LPT) -> look for "USB Serial Port". Note the COM number (e.g., COM3, COM4). Select this number in the Upgrade Tool.
4. Crucial Step: Click the "Download" or "Start" button in the software first.
5. Connect/Power On: Some versions require you to turn the meter off and back on, or hold a specific button while turning it on to enter "Upgrade Mode." Watch the progress bar in the software.

   The "Hidden" Upgrade: Updating the Satellite List Separately

   Edit Parameters

   If you only need to update the satellite list or transponder (TP) frequencies rather than the system software: Use the section in SatlinkTools. To upgrade the software on your Satlink WS-6906

   Connect the Device:

   Connect the RS-232 cable to the PC and the other end to the "RS232" input on the Satlink WS-6906. Open the Upgrade Tool on your PC (e

   Step 1: Install the Drivers

   Connect the WS-6906 to your PC via USB while holding the "Power" button . The PC should detect an "ATMEL" or "Rockchip" device. Install the provided PL2303 or CP210x drivers.

   Post-upgrade improvements (v1.08 or later):