Philips: Speedpro Max E4 Error

E4 error code

An (which may look like h3 if viewed upside down) on your Philips SpeedPro Max indicates that the roller brush is blocked and cannot rotate freely . Troubleshooting Guide to Fix the E4 Error

: Push the side cap back on until it clicks and snap the roller brush back into the nozzle. What if the Error Persists? If the error code remains after a thorough cleaning: Check for Internal Clogs philips speedpro max e4 error

Final note:

The E4 error on your Philips SpeedPro Max is rarely a death sentence. In over 80% of cases, a thorough cleaning of the brush roll and removal of hair tangles will restore normal operation. If not, the replacement brush heads are modular and easy to swap out without buying an entirely new vacuum. E4 error code An (which may look like

• Remove and Tap Filters: Take out the filters (pre-filter and HEPA) and gently tap them to remove dust. If your model has a washable filter, follow the manufacturer's instructions to wash and dry it.
• Reassemble: Once clean and dry, reassemble the filters properly.

2. The Wet Filter Syndrome

Pro Tip

: Use scissors to carefully cut through thick tangles of hair or thread wrapped around the roller. Remove and Tap Filters: Take out the filters

Troubleshooting Steps

• Charging Issues: If your Philips SpeedPro Max is cordless and displays the E4 error, it might be related to charging. Ensure the battery is properly seated and the charger is correctly connected.
• Battery Health: If the vacuum still shows the error after charging, try letting it charge for a longer period. If the issue persists, the battery might be at the end of its life.