Medima P300 Top Upd (2025)
Medima P300 Top: The Ultimate Deep Dive into Performance, Durability, and Value
For precise chemotherapy dosing via the extensive drug library. Neonatal Care: Where extremely low flow rates and high accuracy are vital.
- Wash in lukewarm water: Wash the stocking in lukewarm water with a mild detergent.
- Avoid wringing or twisting: Gently squeeze out excess water without wringing or twisting the stocking.
- Dry flat or hang: Dry the stocking flat or hang it to dry. Do not put it in the dryer.
- Avoid fabric softener: Avoid using fabric softener or bleach, as they can damage the stocking.
You should consider investing in the Medima P300 Top if you are managing any of the following environments: medima p300 top
I’ve put one through a dishwasher cycle after a heavy resin sanding session. It came out looking brand new. Try that with a cheap foam block. Medima P300 Top: The Ultimate Deep Dive into
- Ceiling Void Depth: You need at least 250 mm of space between the true ceiling and the suspended ceiling to house the unit body.
- Drainage: Because it is in the ceiling, a condensate drain pump is highly recommended (many P300 Top variants include a built-in lift pump with a 700mm head).
- Electrical Supply: Requires a dedicated 220-240V / 15A circuit. It is a hardwired unit (not a plug-in).
- Refrigerant Piping: Maximum pipe run between indoor and outdoor unit is 25 meters. Standard 1/4" (liquid) and 3/8" (gas) lines.
Engineered for accuracy, the P300 provides reliable fluid delivery across a wide range of clinical scenarios: Flow Rate Range: 0.1 to 1200 ml/h. Infusion Volume: Up to 20,000 ml. Maintained at ±5% for volumetric delivery. Battery Life: An internal rechargeable NiMH battery provides up to of operation at 25 ml/h. Bolus Function: Supports manual or automatic bolus volumes up to 500 ml. Advanced Features & Safety Wash in lukewarm water : Wash the stocking
- Likely Cause: The electric cooling fan is reverse-rotating or the oil cooler bypass valve is open.
- Fix: Swap two phases of the fan motor. Clean the thermostat bypass.
