Mcgs Hmi Touch Calibration May 2026

Mastering Precision: A Complete Guide to MCGS HMI Touch Calibration

Q4: My MCGS screen reboots during calibration. What’s wrong?

This indicates a power supply issue. The calibration routine may draw extra current. Check your 24V DC power supply for voltage drop.

Save and Exit

: Repeat the process for all points until you see the message "The new calibration settings have been set" . Tap anywhere to exit the program and resume normal operation. Method 2: System Settings Menu mcgs hmi touch calibration

Method 2: Calibration from Windows CE Desktop (Advanced)

Step 5: Save Calibration Settings

• Test critical buttons, sliders, and data-entry fields at various screen locations.
• Try common operator tasks (acknowledge alarm, change setpoint, open menus).

If the touch is so misaligned that you cannot tap the calibration target: Mastering Precision: A Complete Guide to MCGS HMI

Enter Mode

: After the initial boot screen (logo), the HMI will bypass the user application and enter the Touch Calibration interface directly. 2. System Settings Menu Test critical buttons, sliders, and data-entry fields at

Unresponsive Screen

: If the touch is so misaligned that you cannot tap the initial "start" prompt, you can try plugging in a USB mouse to the rear USB ports (USB1 or USB2) to navigate menus if the software allows manual triggering.