Manual Temporizador Digital Ipsa Te 102 34 20 Updated [exclusive] -

IPSA TE 102

To program your digital timer, you can follow these standard steps common to most IPSA and similar digital timer models. 1. Initial Setup & Reset

Características Técnicas del Temporizador Digital IPSA TE 102 34 20

• Press RST (recessed button) with a paperclip.

1. Remove all power from terminals A1/A2 for 30 seconds.
2. Set the rotary dial to mode F.
3. While pressing and holding the potentiometer knob (push inward), reapply power.
4. Wait until the display shows “8888” then “0.0”.
5. Release the knob. Release all dip switches. Your timer is now restored to factory defaults.

• Opción A: Presione el botón RESET (un pequeño orificio en el panel) con un clip o punzón.
• Opción B: Mantenga presionado el botón CLOCK y TIMER simultáneamente durante unos segundos hasta que la pantalla parpadee o se reinicie.