Leica Tcr805 Total Station User Manual [patched] -

Leica TCR 805 Total Station User Manual

1. Power on – Hold the ON button until the screen lights.
2. Level up – Use the electronic bubble. Follow the prompts (usually “Leveling” → adjust foot screws).
3. Set orientation – Point at a known backsight. Press MENU → Set Azimuth.
4. Measure – In basic mode, F1 usually measures distance. F2 records to internal memory.

Leica TCR805

The is a precise 5" accuracy total station designed for construction and engineering surveys, featuring an alphanumeric keyboard and reflectorless measurement capabilities up to 400m. 1. Essential Instrument Setup

1. Setup instrument over control point; level and center; enter station coordinates and orientation via backsight to a known point or azimuth.
2. Perform distance and angle measurements to target points, recording point IDs and descriptions.
3. Periodically recheck control by measuring back to control points.
4. Transfer collected data to office software, apply any required transformations, and produce plan.

[IR/RL]:

Toggles between infrared (prism) and reflectorless (laser) measurement modes. 2. Setup and Leveling TCR805 UserManual 3.0 English | PDF | Ascii - Scribd leica tcr805 total station user manual

Operating the Instrument