Hx711 Proteus Library -

The HX711 library for Proteus allows you to simulate a 24-bit Analog-to-Digital Converter (ADC) designed for weigh scales

• A Proteus schematic component that models the HX711 pins and basic behavior (data output, clock input).
• Optional virtual instruments or probes that let you view the serial data stream or scale output inside the simulator.
• Support for connecting to microcontroller models inside Proteus (e.g., Arduino, PIC) allowing firmware-in-the-loop testing.

// Define pins #define DT_PIN 3 #define SCK_PIN 2 hx711 proteus library

1. Install the library: Download and install the HX711 Proteus library from the Proteus website or other reliable sources.
2. Create a new project: Launch Proteus and create a new project. Choose the desired simulation settings, such as the simulation type (e.g., SPICE) and the unit type (e.g., metric).
3. Add the HX711 library: In the Proteus schematic editor, add the HX711 library to your project by searching for "HX711" in the component library.
4. Place the HX711 component: Drag and drop the HX711 component onto your schematic. You can adjust the component's properties, such as the gain and offset settings, by right-clicking on the component and selecting "Edit Properties."
5. Connect the inputs and outputs: Connect the inputs and outputs of the HX711 component to other components in your schematic, such as voltage sources, resistors, and capacitors.

• Place 4 resistors (330Ω each) in a Wheatstone bridge.
• Connect bridge output to HX711 A+ and A-.
• Make one resistor variable (use a potentiometer) to simulate weight change.

: Often includes a "Test Pin" or interactive slider in the Proteus model to vary the input weight/voltage during a live simulation. Seeed Studio How to Install Download Files : Obtain the specific HX711 library files (usually ) from resources like The Engineering Projects Locate Folder : Right-click your Proteus shortcut and select Open file location , then navigate to the Copy & Paste : Paste the downloaded files into this folder. The HX711 library for Proteus allows you to