Fix Generator V 1 1 Samsung Scx 3405 !link!

"Fix Generator v1.1"

The for the Samsung SCX-3405 refers to a third-party software utility designed to create custom "fix" firmware that allows the printer to function without the original toner chips. The Purpose: "Eternal" Cartridges

Supplies Information Report

: Hold the STOP/CLEAR button for about 15 seconds until the LED stays green, then release. fix generator v 1 1 samsung scx 3405

To generate a fix for your specific SCX-3405 unit, you typically need to provide or enter the following data into the generator: Exact Model Name: For example, Current Firmware Version: Find this in the printer's Configuration Report (e.g., V3.00.01.10 CRUM Number: "Fix Generator v1

  1. Turn off and unplug the printer; let it cool ~5 minutes.
  2. Open the front cover (toner access). Carefully remove the toner cartridge and set it on a clean, protected surface.
  3. Remove visible paper from the toner area by pulling slowly and evenly with both hands in the direction of paper feeding (do not tear).
  4. Open the rear cover / duplex tray (if present). Pull out any jammed sheets from the back toward the exit path—again, steady even force.
  5. Check the paper tray: remove the input tray and any loose or wrinkled sheets; fan the stack and align edges before reinserting.
  6. Inspect the fuser area and rollers: with the toner out and rear cover open, look for small scraps stuck around rollers or the fuser. Remove gently—avoid touching the fuser surface (it’s hot/delicate).
  7. Rotate feed rollers manually (if accessible) to clear trapped bits; use a flashlight to spot tiny pieces.
  8. Reinstall toner and trays, close all covers firmly.
  9. Plug in and power on, then print a test page.

3. Fix "U2-1113" (Engine / Mainboard Error)

Serial Number

: Found on the back of the printer or via the Configuration Report . Turn off and unplug the printer; let it cool ~5 minutes

(Searching related repair terms...)

Generate & Upload

: Use the fix generator to create your custom .hd file. Drag and drop this file onto the usbprns2.exe loader tool provided in the firmware package.

Fix 3: Troubleshooting the Generator Tool Itself