Fanuc Parameter 1860 < iPhone >

Fanuc parameter 1860

Here’s a short story inspired by , which in real life controls the reference counter capacity for the C-axis (spindle orientation) on many Fanuc CNC controls.

Absolute Position Tracking:

Stores the current machine coordinate value for each axis using an absolute pulse coder. fanuc parameter 1860

You will likely interact with or notice this parameter during specific maintenance scenarios: Fanuc parameter 1860 Here’s a short story inspired

low

Imagine a vertical machining center (VMC) with a swing-arm automatic tool changer. When the CNC executes M19 (spindle orientation), the spindle must stop at a precise angle so that the drive dogs on the spindle nose align perfectly with the tool changer’s grippers. If Parameter 1860 is too : When the CNC executes M19 (spindle orientation), the

If you are tuning a machine, adjust in small increments and listen to the motor. The perfect setting is the one that offers the fastest cycle time without tripping alarms or shaking the casting.

Q2: Does 1860 affect normal spindle speed (Sxxxx) operation?

A: No. 1860 only applies to orientation mode (position control). Speed control remains unaffected.

Modifying axis parameters like 1860 can cause the machine to lose its physical orientation. To prevent crashes: Enable Parameter Write (PWE)