Epson M100 Resetter Adjustment Program Tool Guide

To reset the waste ink pad counter on an Epson M100 printer using the Adjustment Program

If you are using a standard adjustment tool, the process generally follows these steps: epson m100 resetter adjustment program tool

Where to get tools and safety

Hardware Maintenance

: Resetting the software counter does not physically empty the waste ink pads. You must clean or replace the physical pads to prevent ink from leaking out of the printer and damaging your furniture. To reset the waste ink pad counter on

The Epson M100 Resetter Adjustment Program Tool is designed for Epson M100 printer users who encounter issues with their printer's ink pad counter. This includes: Make sure your printer is in “service mode”

  1. Make sure your printer is in “service mode” (varies by model – usually hold certain buttons while powering on).
  2. Disable antivirus temporarily during the reset (re-enable after).
  3. Physically check the waste pads first – if they’re soaked, replace them before resetting.
  4. Watch a YouTube video for your specific Epson M100 reset process – menus vary.

Setup

: Connect the printer via USB (not Wi-Fi) and ensure no other printers are connected to avoid communication errors. Execution : Run the AdjProg.exe application. Click Select and choose the M100 model. Enter Particular Adjustment Mode . Select Waste Ink Pad Counter and click OK .

Key Features of the M100 Adjustment Program

The Adjustment Program—often called a "Resetter"—allows you to reset this internal counter to 0% so you can continue printing without a costly service center visit.