Eliwell Sb655 C Manual Patched -

The Ultimate Guide to the Eliwell SB655 C Manual: Programming, Wiring, and Troubleshooting

1. Press and hold the SET button for approximately 5 seconds until the display shows “PA” (Password).
2. The display will flash “PA” and then show “0” (or “-00”).
3. Use UP/DOWN to enter the password. The default password is 3 (sometimes 5 or 55 on older units – try 3 first).
4. Press SET once. The first parameter code (e.g., “SP”) will appear.

Exit

: Press the FNC (function) key to return to the previous level or exit without saving.

Before programming, understand what you are looking at: eliwell sb655 c manual