Diagnostica Stago Start 4 Coagulation Analyzer Manual Verified Site
Stago STart 4
The is a semi-automated benchtop coagulation analyzer that uses an electro-mechanical Viscosity-based Detection System (VBDS) to perform clotting, chromogenic, and immunoassay tests. This system is notably interference-free from lipemic, icteric, or hemolytic samples. Core Technical Specifications Methodology Clotting, Chromogenic, and Immunoassay Detection Principle Electromagnetic sensor measuring steel ball movement Incubation Wells 16 wells (4 columns x 4 cells) maintained at Measurement Channels 4 independent channels Reagent Positions 2 positions at 37∘C37 raised to the composed with power C (one with a magnetic stirrer) Timers
Warm-up
: The device requires a 30-minute warm-up period before use.
Disclaimer: This article is intended for educational purposes. For clinical use, always refer to the official Diagnostica Stago printed manual and your laboratory’s Standard Operating Procedures (SOPs). diagnostica stago start 4 coagulation analyzer manual
The manual bridges the gap between the analyzer’s technical capabilities and the lab technician’s daily workflow.
Capacity:
4 measurement channels and 16 incubation wells maintained at Stago STart 4 The is a semi-automated benchtop
Measurement:
Move the cuvette to a measurement channel. Add 50–100 µL of pre-warmed reagent using the electronically-linked pipette. The analyzer starts measurement automatically upon reagent addition and prints the result once the steel ball movement stops.
Chapter 15: Maintenance Schedule
Alena handed him a laminated card she had made from . Manual Answer: Yes, but you must validate the method
- Manual Answer: Yes, but you must validate the method. See "Open System Configuration," Section 4.7. You will need to manually program the reagent's factor and normal ranges.
Diagnostica Stago START 4 Coagulation Analyzer Manual
If you only read one chapter of the , make it the maintenance section. Stago recommends a strict regimen: