D-link Dsl-2750u V2 Latest Firmware Update

Report: D-Link DSL-2750U V2 Firmware Status

Step 2: Log into the Router’s Web Interface

Verify Hardware Revision

: Firmware is hardware-specific. Check the sticker on the bottom of your router for the H/W Ver (e.g., V1, V2, C1, T3).

1. Power off.
2. Hold reset button, power on, keep holding reset for 20 seconds.
3. Set PC IP: 192.168.1.2, then browse to 192.168.1.1.
4. Upload DSL-2750u_V2_ME_1.20.bin via recovery page.
5. Wait 10 minutes.