Black Copper Pos P80 Driver Setup V7.17 !exclusive! Site

Black Copper POS-P80 thermal receipt printer uses the universal POS Printer Driver V7.17

• Windows 7 / 8 / 10 / 11 (32-bit or 64-bit)
• Printer connected via USB, Serial, or Ethernet
• Admin access to install drivers
• Driver file: BlackCopper_P80_v7.17.exe or .zip

Prerequisites:

Before you begin, ensure you have the following: black copper pos p80 driver setup v7.17

• Never flash firmware while device has a low battery (<30%)
• Do not use v7.17 with non-P80 boards (e.g., Pico 25 or OG Pico)
• POS v7.17 enables custom curves and extended TCR – refer to pos_guide.pdf in package for advanced settings
• Keep backup of original firmware (dump via pos_flasher --dump)

The thermal paper roll is inserted correctly (heat-sensitive side facing the print head). Black Copper POS-P80 thermal receipt printer uses the

Step-by-Step Installation Guide

1. Unplug the printer and turn it off.
2. Extract the driver ZIP to a temporary folder.
3. Open the extracted folder, right-click the setup or installer executable (e.g., Setup.exe) and choose Run as administrator.
4. Follow the installer prompts:

   Release Narrative