Skip to main content

Atir Strap And Beamd With Fix Crack Fix May 2026

STRAP

Atir Engineering Software provides structural analysis and design through its primary suites, (STRuctural Analysis Programs) and BEAMD . While there is no single feature titled "Fix Crack," the software handles cracking in reinforced concrete (RC) through advanced deflection modules and specific design code checks. Analysis of Cracking in STRAP & BEAMD

  • Use structural epoxy injection for hairline cracks.
  • For wider cracks or spalling, remove damaged concrete, clean reinforcement, apply corrosion protection, patch with repair mortar, and add external steel/FRP plates bonded with epoxy if needed. Structural engineer usually required.

STRAP is a versatile static and dynamic analysis program capable of handling structures ranging from simple plane frames to complex high-rise buildings and bridges. ATIR Engineering Key Capabilities Atir Strap And Beamd With Fix Crack

  1. Applies compressive force across the cracked section.
  2. Prevents further crack opening under service loads.
  3. Restores shear and flexural capacity.
  4. Acts as a secondary reinforcement layer.
  1. Crack injected with epoxy resin.
  2. Two 60 mm × 6 mm hot-rolled Atir straps installed on beam bottom face, each spanning 1.2 m (600 mm beyond crack each side).
  3. M12 chemical anchors epoxy-grouted at 200 mm from crack ends.
  4. Straps pre-tensioned to 30 Nm torque.
  5. Painted with anti-corrosion coating.

design, detailing, and drafting of reinforced concrete (RC) beams Use structural epoxy injection for hairline cracks