Anytone At5555n Ii Service Menu Work «ULTIMATE — STRATEGY»

service menu

AnyTone AT-5555N II is a popular high-performance 10-meter radio, known for its extensive customization options. While the standard menu allows for basic adjustments, the (also known as the hidden or alignment menu) provides deep access to critical calibration settings like power levels and modulation. Critical Warning: Read Before Proceeding

Risk:

Changing these values without proper test equipment (spectrum analyzer, frequency counter) can result in the radio transmitting off-frequency or causing interference on adjacent channels. anytone at5555n ii service menu work

Saving

: Power cycle the radio to save your changes and return to normal operation. service menu AnyTone AT-5555N II is a popular

press and hold the MENU and MODE buttons while turning the radio on

To access the Anytone AT-5555N II service menu, you must , then quickly press the remaining top-row buttons ( DW , RB , NB , SCAN , MEM , and EMG ) in order . Document default values on paper

FUNC

He held down the button and powered the unit on.

How to enter the service menu:

🔧 Turn the radio off. Press and hold the FUNC button and the BAND button simultaneously, then power on the radio while holding them. Keep holding until the display shows "SERVICE" or a different firmware version indicator.

  1. Document default values on paper.
  2. Use a dummy load and accurate meter.
  3. Change only one parameter at a time.
  4. Save using FUNC button before exiting.
  5. If you make a mistake: Factory Reset (FUNC+A/F at power-on) followed by re-inputting your known good service menu values.

: Used for fine-tuning the voltage limits for specific frequency steps (e.g., .00, .04, .05, .09).

How to Access the Service Menu

Libraryping Cart